記事一覧

Coconut Shell Charcoal Making Machinery For Charcoal Production

Charcoal can be a black, lightweight residue composed of carbon and ash obtained by the removing of water and other unstable constituents based on vegetable or animal sources. The development process involves a slow pyrolysis which is the heating of substances into a very high temperature in the lack of oxygen. Common Charcoal is made out of coal, peat, wood, petroleum, or coconut shells.

Charcoal can be used for heating or cooking fuel but has several other uses. Compressed charcoal is used in pencils, gun powder and powdered charcoal can be used for medicinal purposes, for example charcoal capsules for digestive problems. A newly released discovery is charcoal can make unproductive soil into productive, carbon-rich soil.

Coconut Shell Charcoal Making Machinery

Coconut Shell Charcoal Making Machinery

Modern strategies for charcoal making add the employment of retorting technology which is actually a procedure for heat recovery solely provided by the combustion of gas that may be released during the carbonization process. The properties from the finished products depend on the sort of material charred, in addition to in the charring temperature. To be able to create a high purity charcoal product, the original source material has to be free from non-volatile substances.

The raw materials utilized for charcoal production may be anything including straw, bark, twigs, sawdust, corn cob, bamboo sawdust, factory sawdust, wood scraps from furniture, or coconut shells. Producing charcoal from natural raw materials is good for environmental protection along with the re-utilization of agricultural waste materials is usually supported and advocated by governments.

Coconut Shell Charcoal Making Machinery to produce charcoal from coconut shells includes:

1. Crusher Machine

2. Drying Machine

3. Briquette Extruder Machine

4. Carbonizing Machine

Coconut Shell Charcoal Making Machinery Production Line

1. The Crushing machine is commonly used to interrupt down material which is greater than 5.5mm. Any pieces which are greater than 200mm must be separated into smaller sizes of 5.5mm before processing within the Crusher.

2. The Drying machine is commonly used once the moisture measure of the raw material is above 12%. The moisture level has to be reduced to between 6% and 8% (as an example the dryness of sawdust) before it can be processed further in the Briquette Extruder machine. The production may be made to meet the criteria of customers, for example making sawdust into half-charcoal sticks. The Drying machine is equipped with an auto controlling home heating system and can be used other purposes say for example a water boiler or perhaps a heater to warm a house.

Based on the dimensions of the device it can handle from 300 – 500kg, 900 – 1200kg, or 1300 – 2,100kg of raw materials measuring between 3 – 5mm. Temperatures reached vary between 180°C - 250°C. the motor power from the three different sized machines range between 4Kw to 5.5.Kw, to 7.5Kw. The weights are: 1200kg, 1600kg, and 2100kg. Sizes are: 10m x 1m x 2m 15m x 1m x 2m 21m x 1.2m x 2.5m.

3. The Briquette Extruder machine

The development may be designed to meet the criteria of customers, by way of example making sawdust into half-charcoal sticks. It comes with an automobile-controlling heating system and motor power ranges between 11kw, to 15kw, to 18kw for your sizes of machines and weighs from 800kg, to 1000kg, to 1200kg. The measurements are: 1,630mm x 600mm x 1,260mm or 1,860mm x 800mm x 1,360mm or 2,100mm x 1,000mm x 1,560mm. Purchase the machine today: http://carbonationmachine.net/coconut-shell-charcoal-making-machine/.

4. The Carbonizing machine can be used to transform the half-charcoal sticks in a finished product. The machine comes with a hyperploid steam cooling, high-temperature system. The cooling process could be accelerated as a way to increase the pace of production. The machine are equipped for up to 1500kg at a temperature of 430°C. It comes with a 1.5kw motor and weighs 2,500kg and will produce finished products in 8 – round the clock.

These appliances undergo a 100% QC inspection before shipment and give high quality 100% guaranteed post sales service.

留言

发表留言

秘密留言